Pebax Palladium™ Shrink Tubing

Pebax Palladium™ Shrink Tubing

Select sample sizes

If you don't see the sizing, color, or quantity you need, call us at (800) 337.0901
Tubing can be cut to specific lengths per your specification
2:1 tubing can be provided in continuous tubing on spools
2:1 tubing is in 60" (150 cm) lengths
4:1 tubing is in 12" (25 cm) lengths
Precision Cut Lengths are a specialty
Tight tolerances, highly consistent.


  • Highly flexible
  • Strong and tough
  • Superior surface finish
  • Radiation sterilization
  • Conformal, tight fitting
  • Low longitudinal shrinkage
  • High compressive fitting
  • USP Class VI
  • Tough, durable, stable


  • Shrink temperature 340°F / 171°C
  • Durometer (Shore D)72 (other durometers are available)
  • Elongation at Break300%
  • Tensile Strength at Break7,500 PSI
  • Dielectric Strength500 volts / mil
  • Tubing CertificationsClass VI
  • SterilizationGamma, E-Beam, ETO stable Test for autoclave or repeat use


  • PEBAX outer layer for catheter shaft
  • Wire insulation
  • Strain relief
  • Manufacturing aid
  • Cover coils and braids
  • Polymer jacket for spiral cut
  • Hypotubing
  • Wire Insulation
  • Bundle wires for cable harnesses
  • Protect splices and components

Manufacturing capabilities

  • Custom sizes, wall thickness, color and resins
  • Precision cut lengths
  • Scoring and slit tubing
  • Custom expansion of customer-supplied tubing
  • Continuous re-sizing (“necking”) of thermoplastic tubing